FIND NEWAE TECHNOLOGY PRODUCTS ON MOUSER ELECTRONICS
.png)
ChipWhisperer-Lite 32-Bit
MSRP:
$315 USD
The ChipWhisperer-Lite is part of NewAE Technology Inc.’s aggressive pursuit of it’s mission to bring side-channel power analysis and glitching attacks to every engineer and student. The FULLY open-source (hardware, software, firmware, FPGA code) is launching a revolution in hardware security.
The ChipWhisperer-Lite integrates hardware for performing power analysis measurement, device programming, glitching, serial communications, and an example target that can be loaded with cryptographic algorithms all into a single board. The single-board version show here comes with an 32-bit STM32F303 Arm Cortex-M4 processor as a target (other versions are available).
Features
-
Low-Noise Amplifier (LNA) with adjustable gain of up to +60 dB for analog power measurements.
-
10-bit ADC up to 105 MS/s, with ultra flexible clocking mechanism allow synchronous power capture.
-
Generate clock glitches with sub-nS resolution on timing.
-
Crowbar-based voltage glitch generator.
-
Built-in serial port for communications and programming STM32Fx targets.
-
Built in XMEGA and AVR programmers.
-
Open-source design allowing you to modify microcontroller & FPGA firmware.
-
Integrated STM32F303 32-bit Arm target for power analysis & fault injection integrated onto board.
-
Can separate target off board to use tool on additional targets.
Educational Material
Using our Jupyter notebooks, you can learn how DPA works, how to break password checks, how fault injection works, and even more. Or use ChipWhisperer-Lite with our online training offerings.
Designed for DPA
ChipWhisperer-Lite is designed for power measurements. It integrates a high-gain LNA with a 10-bit ADC, and a flexible synchronous sampling mechanism unique to ChipWhisperer capture hardware.
Multiple Options
The ChipWhisperer-Lite comes in options with XMEGA or ARM integrated targets, or with a stand-alone target for more flexibility.
Documentation
Specifications
ADC Specifications | 10-bit ADC, 105 MS/s maximum sample rate |
ADC Sample Clock Source | (1) Internal generator, (2) External input direct, (3) External input with phase adjustment, (4) External input with 4x multiplier, phase adjustment |
Analog Input | AC-Coupled, up to +55dB gain (adjustable) |
Trigger Sources (Glitch & ADC) | Rising/Falling Edge, Level |
GPIO Types | Serial, clock, logic line (i.e., for reset pin) |
GPIO Voltage | 3.3V |
Clock Generation Range | 5-200 MHz |
Clock Output Type | (1) Regular, (2) with glitch inserted, or (3) glitch output only |
Glitch Width (min) | ~1nS (depends on cabling used) |
Glitch Offset | Adjustable in < 200pS increments |
Voltage glitch type | Crowbar output, high and low-power outputs |
Crowbar pulse current | 20A |
USB Interface | Custom open-source USB firmware, up to 25 MB/s speed |
Sample Buffer Size | 24 573 |
On-Board Target | STM32F303 |
Programming Protocols | Atmel ISP (for AVR), Atmel PDI (for XMEGA), STM32Fx Bootloader |
Connectors | No measurement or target connectors mounted. |
Packing List
ChipWhisperer-Lite 32-bit Board | ChipWhisperer-Lite Single Board, with STM32F303 Target | 1 | |
Micro-USB Cable (3 ft) | Micro-USB cable for ChipWhisperer-Lite | 1 |
